Your AI Mechanic Assistant

1. Warm up the engine for 5 minutes to circulate the oil 2. Locate the oil drain plug under the car (near the front, passenger side) 3. Place a drain pan (at least 8 quart capacity) under the plug 4. Remove the drain plug with a 13mm socket wrench 5. Allow oil to drain completely (about 10-15 minutes) 6. Replace the drain plug (torque to 30 ft-lbs) 7. Locate the oil filter on the passenger side of the engine 8. Remove the old filter using an oil filter wrench 9. Apply a thin film of new oil to the new filter's gasket 10. Install the new filter (Mopar 68191349AA or equivalent) 11. Add 7 quarts of 5W-20 synthetic oil through the oil fill cap 12. Replace the oil fill cap and start the engine 13. Check for leaks and proper oil level with the dipstick 14. Reset the oil life monitor in the instrument cluster